Akumulatora kastes pamatne 48V 16S DIY akumulatora kastēm | Ripojoša platforma ar bloķējošiem riteņiem, ES krājums

Akumulatora kastes riteņi jūsu 48V 16S DIY akumulatora kastei — tērauda ripojoša pamatne ar bloķējamām riteņiem, kas ļauj pārvietot gatavu 120kg komplektu ar rokām, nepaceļot to. Piestipriniet to zem korpusa, ievietojiet šūnas un ripojiet visu kopā uz vietu.

Kas iekļauts akumulatora kastes riteņu komplektā

Šis piedāvājums ir tikai ripojoša pamatne. Tā nav akumulators, nav korpuss un nav BMS.

Kuriem akumulatora korpusiem šie riteņi der

Pamatne ir paredzēta 48V / 16S DIY korpusiem, kas būvēti LiFePO4 komplektiem virs 280Ah — kastēm, ko pārdodam šajā veikalā: 15kWh DIY akumulatora kastes komplekts A1, 280Ah kaudzē saliekamais akumulatora kastes komplekts A2, 320Ah horizontālais DIY korpuss A3 un V3 vertikālais DIY akumulatora kastes komplekts.

Citu piegādātāju korpusi var izmantot citu skrūvju izvietojumu. Nosūtiet mums savu kasti, un mēs apstiprināsim derīgumu pirms pasūtīšanas.

Cik smags ir gatavs 16S komplekts?

Šis ir iemesls, kāpēc pamatne pastāv. Pilns 16S komplekts ir daudz smagāks, nekā vairums būvētāju sagaida:

Cell weights vary by brand — EVE LF280K is around 5.4kg per cell, and 314Ah cells are a little heavier. Either way you are handling well over 100kg once the pack is assembled, and that is not something you lift onto a shelf.

Build the pack on the base, or fit the base before you install the cells. Both work; the second is easier on your back.

Choosing Casters: Load, Floors and Brakes

Load rating. Four casters rated 75kg each carry 300kg, which leaves comfortable headroom for a 120kg pack. [Confirm your base’s caster rating.] Brakes matter more than wheels — a locking caster keeps the pack from creeping while you torque terminals. Floor type: hard floors roll easily, carpet and uneven concrete need larger diameter wheels. Cable strain: never roll the pack by pulling on DC cables; move it by the enclosure handles and re-check terminal torque afterwards. Clearance: leave room behind the pack for communication cables and any ventilation gap.

Fitting the Rolling Base: 4 Steps

1. Empty the box. Fit the base before the cells go in — a bare enclosure is around 30kg and easy to turn over.
2. Line up the mounting holes and hand-tighten the bolts first.
3. Torque in a cross pattern so the base seats evenly and does not distort the enclosure.
4. Fit the casters, lock the brakes, then build your pack. Re-check every bolt after the first move.

Technical Specifications

Biežāk uzdotie jautājumi

Does this include the battery box? No. This listing is the rolling base only — the enclosure, BMS, LCD and cells are sold separately.

Can I fit the base after building the pack? You can, but it is much harder. A finished 16S pack weighs around 118kg; fitting the base while the enclosure is empty is far safer.

Will the wheels fit a box from another brand? The bolt pattern is matched to our A1, A2, A3 and V3 enclosures. Send us your box dimensions and we will confirm.

Do the casters have brakes? [Confirm with the supplier, then state it plainly.]

How much weight can the base carry? [Confirm the rated load, then publish it — this is the question every buyer asks.]

Build Your Box: Related Kits and Cells

Pair the rolling base with a matching enclosure — the A3 box (with JK V19 200A BMS or as an empty enclosure), the A2 280Ah Stackable Kit, the V3 Vertical Kit, or the A1 15kWh Kit. Cells in 280Ah, 314Ah and 320Ah are available in the same warehouse.